Comments
SSCC codes should be 18 digits and in AX they are 20 which is just wrong.
The SSCC code only needs to be 20 digits when it is printed as a barcode and then it should be formatted as (00)123456789123456789.
IMO that should be handled by the setup relating to printing the barcode labels.
Category: Warehouse Management
Suggest the following change should be made.1. A new check box ‘Check Digit’ to be added to warehouse parameters – General – Company information fast tab2. When ‘Generate license plate’ flag is checked on the mobile device menu item the license plate ID shall be calculated as follows: -a. If the Check Digit flag is not checked the license plate will be generated and consist of GSI company prefix + License plate number sequence.b. If the Check Digit flag is checked the license plate will be generated and consist of GSI company prefix + License plate number sequence + 1 character check digitcheck digit calculation according to barcode format, e.g. SSCC 17 digits, GSIN 16 digits etc.As an example in SSCC format GSI company prefix = 12345678LP Number sequence = 901234567
Result without check digit parameter checked= 12345678901234567Result with check digit parameter checked= 123456789012345675
Category: Warehouse Management
Extend of that if full GS1-128 integration, decode, and impact on scenario.
Category: Warehouse Management
Impact of this:
If a vendor sends out the LP’s they have shipped via ASN they will send the SSCC numbers (18 digits) When the LP’s arrive and they are scanned, an application will skip the 00 and will receive the SSCC codes in the system. So if AX creates SSCC’s with 00 and sends out the shipped LP’s, they will send 2 characters too much.
When labelsoftware prints labels, label software will construct SSCC codes and will add the application identifier to the barcode.
SSCC codes are 18 digits long. Only in AX they are 20 digits long.
Category: Warehouse Management
Administrator on 7/11/2019 9:02:27 PM
The feature has been enabled in 10.0.2
In order to cover flexibility of the number sequence, following setup is enabled that is currently behind the flight “WHSNumberSequenceExtensionFeature”.
The flight will activate a new setup in Warehouse management parameters Number sequences and a new form.
Out of the box, this setup is available for the following number sequences:
In order to cover flexibility of the number sequence, following setup is enabled that is currently behind the flight “WHSNumberSequenceExtensionFeature”.
The flight will activate a new setup in Warehouse management parameters Number sequences and a new form.
Out of the box, this setup is available for the following number sequences:
Thanks
Philippe
Thank you very much for this feedback.
We have it registered in our backlog, we have just no come to it yet.
Sincerely,
Philippe Jacobsen
PM, Microsoft