Kerwin Kassulker XR Instructional Designer & Senior 3D Generalist

Kerwin Kassulker

Joined: 2/1/2023

  • 1:1 Scale Identification for 3D Parts that are placed

    Wed, 01 Feb 2023 21:50:17 GMT – Dynamics 365 Guides – New 

    Hello,


    When Authoring a Guides Experience, if you make an adjustment to the scale of a 3D model you have placed... there is way to "reset" the scale of the model to its original imported scale of 1:1.


    Once possible interface might be If the slider could display the scale of the model as you make adjustments, and then as you get it back to its original scale of 1:1, it would provide some sound feedback and "snap" into the 1:1 scale on the slider.


    Regards,


    Kerwin


  • Ability to Snap Rotation of 3D Parts to their 90 Deg Orthographic Quadrants

    Wed, 01 Feb 2023 22:06:37 GMT – Dynamics 365 Guides – New 

    Hello,


    Currently, when Authoring in Guides, and you place a 3D Model (e.g., Holographic Anchoring) ... there is nothing that allows you to snap it to the 90 Deg Quadrants a 3D model has defined when created. e.g., XY, YZ, etc.


    It is very tedious, if not impossible at times, to get the model anchored at correct angles... i.e., and you have to "hunt" for the spot using the rotation tools. They should freely rotate, and then "snap into place" at the 90 Deg Quadrants.


    I forward a thank you for your consideration!


    Best regards,


    Kerwin